PAINT & COATINGS
PROTECTING YOUR EQUIPMENT.
Bilton supplies a wide variety of internal and external coatings for the equipment we manufacture. We’re experts at matching the correct paint or coating to your equipment’s application. Internal coatings for equipment used in natural gas processing inhibit corrosion, extending the life of your equipment. We can also apply food-grade coatings for tanks holding any type of food or potable water. Bilton does all of the grit blasting before painting in-house to the strictest surface preparation standards as per the Society for Protective Coatings (SSPC).
PAINT & COATING CAPABILITIES
Internal epoxy linings: Tanks & vessels (Products include but not limited to 100% & solvented Devoe, Sherwin Williams, 3M, Carboline, Cloverdale)
External coatings: Structural Steel, tanks, vessels, oilfield & process equipment, flare stacks etc. (Products include but not limited to Endura, Devoe, Sherwin Williams, 3M, Carboline, Cloverdale)
Internal & external pipe & spool coatings: 2” & up (Products include but not limited to 100% solids & solvented Devoe, Sherwin Williams, 3M, Carboline, Cloverdale)
Rubber linings: Tanks, Vessels, & Internal spooling (Products include but not limited to Neoprene, Triflex, Natural, & Cholorbuytl)
Reinforced Fiberglass laminate: Tanks & Vessels (Products include but not limited to Corrocoat, Devoe, & Cloverdale)
Passive Fire protection: Structural, Tanks & Vessels Intumescent & Cementitious (Products include but not limited to Firetex, Chartek, Interchar, & Pyrocrete)
Polyurethane Spray foam: Tanks, Vessels, skids, structural
Polyureas: Tanks, Vessels, skids, structural, secondary containment
Pickling & Passivation: Stainless steel (Products Avesta)
Concrete Coatings: Concrete floors (Products TKO1000)
Indoor Blasting c/w grit recovery system
Indoor Blasting c/w grit recovery system
Coal & Copper Slag
Boiler- Used to cure rubber: 60HP Steam boiler for the curing of rubber lined tanks or vessels. Can be used for the cleaning of tanks as well
400,000 CFM Dust Collector: Sandblast dust collector moves high volumes of airborne dusty air for better visibility, cleanliness, and health
(2) 250 hp Air Compressor: 2 250 HP electric compressors totaling 3500CFM of air. No starvation of air with air movers, No down time to lack of air, work on many projects at one time without air restrictions. Capable of running 4 sandblasters
Max Curing Temps- 8 Different Curing Processes: Capable of curing up to 4 separate coatings to 165F at one time
Paint Kitchen (Safety and Quality): Class 1 Div1 paint kitchen for ease and contamination cleanliness of mixing products, Contamination cleanliness of spray equipment.
REPAIR & MAINTENANCE
PROVIDING EMERGENCY REPAIRS ACROSS WESTERN CANADA.
You won’t find anyone better qualified to maintain your oilfield, process and manufacturing equipment than our team at Bilton. We are R-stamp certified by the American Society of Mechanical Engineers (ASME) to repair or alter pressure vessels.
Before Bilton works on your equipment, you can count on us for an honest assessment of whether or not it is worth repairing. We are happy to quote the price of repairs versus buying new.
Bilton has mobile units and qualified personnel to assist with emergency repairs, processing plant shutdowns or expansions anywhere in western Canada. Our mobile fleet is supported by Bilton’s in-house engineering services and Innisfail manufacturing facilities.
YOUR SUPPLIER OF IMPOSSIBLE-TO-FIND PARTS.
Bilton has a large machining bay equipped with a state-of-the-art plasma cutting table. We have the capability to plasma cut parts for your manufacturing facility or anything else you need machined. Our plasma cutter is extremely accurate, allowing us to machine parts demanding tolerances within a fraction of one millimetre.
We have steel braking equipment to make shapes and forms.
Bilton’s automated cutting table is programmed to optimize material usage so you get as many parts as possible out of each piece of steel. Less wasted steel lowers your manufacturing costs.
DESIGNED FOR VERSATILITY
Bilton manufacturers rigid polyurethane insulation panels that are ideal for tanks, vessels, large pipes and buildings. Our insulation panels deliver a high-insulating value of R 7.1, and they are easy to install, lightweight and maintenance free. Single-sided insulation panels are typically used for cladding. Double-sided panels are great for building freestanding structures and are available with a variety of metal surfaces. Insulation panels come in lengths up to 28 feet, widths of 48 inches and thickness from 1.5 to 6 inches. Impermeable cladding options include aluminum, galvanized, galvalume and pre-painted.
Bilton Rigid Polyurethane Insulation Panels are composed of a uniform closed cell polyurethane foam core bonded to various sheet metal skins on one or both sides. The composite single sided panels are ideal for cladding and are available saw scored to fit tanks, vessels, large pipe or non flat surfaces. The double sided panels are available with combinations of metal surfaces that can be applied to suit desired appearance and functionality. They are insulated modular building panels that can be used for wall, door, and roof applications. Panels can be joined with thermally broken lap joints or with structural extrusions for butt, corner, roof, window and door applications.
One Piece Construction
Installation Ease & Speed
Does Not Support Fungi
Steel Skins .016” Nominal
Closed Cell Polyurethane Foam Core
2.5 lb./cu. ft. Density
R 7.1 / inch Nominal R-Value
Aluminum Skin .024” Nominal
Panel Thickness: Standard 1½ – 6 Inches*
Panel Lengths: Maximum 28 Feet*
Panel Widths: 48 Inches Nominal
*Other lengths and thicknesses available on request
Aluminum - Single sided panels available in all four options
Galvanized - Double sided panels available in any combination
Galvalume - Other surfaces available on request